How To — Use Snake On Toilet

Once you feel the clog loosen (water may begin to drain), pull the snake back slowly while still cranking. If you yank it out like a sword at a renaissance fair, you’ll spray debris across the galaxy.

Now go forth, brave warrior. Unclog with dignity. how to use snake on toilet

Ensure the rubber guard sits against the porcelain to prevent scratches. 2. Insert the Cable Push the handle down while turning it clockwise. Keep the pressure steady but gentle. Continue until the entire cable is inside the drain. 3. Break the Clog When resistance is felt, the clog has likely been reached. Crank the handle to "hook" or break the debris. If the handle won't turn, pull back slightly and try again. 4. Retrieve and Flush Crank the handle while pulling the cable back up. Clean the tip of the snake immediately. Flush the toilet to see if the water drains freely. ⚠️ Important Safety Tips Once you feel the clog loosen (water may

If the toilet still won't drain after two or three attempts, the clog might be located further down in the main sewer line. Unclog with dignity

You will shatter the porcelain like a vandal at a museum. Your toilet will become a sharp, expensive fountain.

Place the curved "elbow" of the snake into the bottom of the toilet bowl.

Is the cause of the clog known, such as excess paper or a foreign object?