Siemens E35 Error ~upd~ Info

| Cause | Explanation | |-------|-------------| | | Coarse/fine filters full of food debris blocking water flow to the pump. | | Blocked drain hose | Kinked, pinched, or clogged with grease/food. | | Drain pump impeller jammed | Broken glass, bone, or plastic stuck in the pump. | | Drain pump failure | Motor windings burnt or pump not spinning. | | Siphon issue | Drain hose connected directly to a sink trap without a high loop, causing backflow. | | Faulty pressure switch | Sends incorrect water level signal to the main board. | | Blocked pressure chamber | The small air chamber connected to the pressure switch is clogged with debris. | | Main control board error | Rare, but possible if it misreads signals. |

This is the most definitive test.