Go to your kitchen sink or stovetop. Heat water until it is hot to the touch (think the temperature of a very hot cup of coffee or tea), but not bubbling. If you used a kettle, let it sit for a few minutes to cool down slightly.
I tried the “hot water” trick after seeing it online for a minor clog. The idea is simple—heat helps break down soap scum, grease, or soft waste. In theory, it sounds great. In practice? It’s risky.
💡 Never use boiling water. Boiling water can crack the porcelain of your toilet bowl, leading to an expensive replacement. Aim for "very hot" faucet water or water that is just beginning to steam. 4. The Pour hot water for clogged toilet
Dealing with a clogged toilet can be a major headache, but you don't always need to call a plumber right away. One of the most effective and simplest DIY methods involves using something you already have: hot water. When done correctly, this technique can break up organic waste and dissolve soap scum without the need for harsh chemicals.
For extra power, add a few squirts of dish soap or about a cup of baking soda into the toilet bowl. These help break down organic matter and grease, making the clog slippery. Go to your kitchen sink or stovetop
If the water level in your toilet is already at the rim, do not add more liquid. You’ll need to manually remove some water with a small bucket or cup first. Aim for the bowl to be about half-full. 2. Add Dish Soap
Squeeze a generous amount of liquid dish soap (about a 1/4 cup) into the bowl. The soap acts as a lubricant for the pipes and helps the clog move. Let it sit for 5 to 10 minutes to penetrate the blockage. 3. Heat the Water Heat a large pot of water on the stove. I tried the “hot water” trick after seeing
Call a if the backup affects other drains in your home. To help me give you more specific advice, let me know: Did a hard object (like a toy) fall in? Is the water draining slowly or not at all? Are other drains in the house acting up too?