This guide walks through the process, from the "soft" resets to the more thorough "hard" resets.
: Right-click the adapter and select Disable device . Wait about 10 seconds, then right-click it again and select Enable device . 2. The Network Stack Reset (Command Prompt) ethernet adapter reset
On many Intel server NICs, a is possible via PCIe config space offset 0x4 (Device Control) – writing a 1 to the “Bus Master Enable” bit twice in quick succession. Some enterprise switches also support link flap – remotely disabling/enabling a port to force a client’s adapter to reinitialize. This guide walks through the process, from the