Unclog Shower Drain With Plunger Repack < UPDATED >

By mastering the plunger, you can save yourself a costly plumber's visit and keep your bathroom running smoothly with just a few minutes of effort.

If you are plunging a shower-tub combo, you seal the overflow drain (the silver plate on the tub wall). If you don't, the air pressure you create will simply escape out of the vent instead of pushing against the clog. Stuff a wet rag into the opening or cover it tightly with duct tape. 3. Create a Water Seal unclog shower drain with plunger

If you’ve tried three rounds of plunging and the water still isn't moving, you likely have a "solid" clog (like a deep mass of hair or a small object) or a backup further down the main line. At this point, you may need to: By mastering the plunger, you can save yourself

Plunging works for 90% of soft blockages like hair and soap. However, if you’ve plunged repeatedly and the water still won't budge, you may have a deeper issue. This could be: Stuff a wet rag into the opening or

After 20 seconds of plunging, lift the plunger and watch the water.

Plunging is a mechanical solution rather than a chemical one. It uses to dislodge a clog, pushing and pulling the obstruction until it breaks apart or moves down the line. It’s safer for your plumbing, better for the environment, and costs nothing if you already own the tool. Tools You’ll Need

Before you call a plumber or pour harsh chemicals down the pipe, there is a simple, eco-friendly, and highly effective tool you likely already have under your sink: